Instructions for Hikvision Cameras

USB Connection:

1. Install the Hikvision software, connect the camera and then open the software.

2. Open the XINGYING software to connect to the lens, and click on the reference video.

Lens Synchronization:

1. Connect the Hikvision USB camera.

2. Use a connector to connect the lens synchronization cable.

3. Open the Hikvision software, wait for the device to be detected, double-click to open the device, click on "Trigger" and turn on the trigger mode.

4. Open the XINGYING software to connect to the lens, click on "Play" and click on the reference video.

Synchronization Box Synchronization:

1. Use a network cable to connect the synchronization box to the switch, and then connect the camera synchronization cable to the output port of the synchronization box.

2. Open the Hikvision software, wait for the device to be detected, double-click to open the device, click on "Trigger" and turn on the trigger mode.

3. Open the XINGYING software to connect to the lens, click on "Settings" and select the synchronization box.

4. Select the device, input and choose the internal clock, check the "Output TTL Out" (Note: Check the corresponding output port according to which output port the camera synchronization cable is connected to), and select the first option for the output mode.

5. Open the playback software and click on the reference video.