After setting the force plate parameters, check "Use Force Threshold" in the "Noise Filters" module and set the value
to "5" to filter out noise on the force plate in the 3D view.
Set the channel magnification by opening the Force Platform Configuration window, entering the frame rate multiplier
at the bottom, and pressing Enter. The magnification setting will be successful. Sampling frequency value = frame
rate multiplier × frame rate,The maximum value for the ampling frequency limit is 2000.
Force Platform COP Limit: After setting the limit in the software, the force column will not exceed the size of the
force platform. The unit of measurement for the set value is in millimeters. The COP limit function is available for
all force platforms.
After setting the COP limit, modifying the limit in the recorded COP data requires pausing the playback. The COP
function switch is enabled by default, with a default value of 0. If the recorded data does not contain it, the force
platform limit value function can also be used in post-processing. If real-time recording includes COP limit, the
exported file data will also contain it.